Lesson notesDomain 9: Safe Work Practices · 15% of the exam
Tools, chainsaws, chippers, aerial lifts and cranes
Chainsaw safety features and kickback, chippers and stump grinders, aerial lifts, cranes and large vehicles, and inspecting equipment before use.
Key points
Chainsaw featuresChain brake, chain catcher, throttle interlock, hand guards, anti-vibration mounts, spark arrestor.
KickbackUpper tip of the bar (kickback zone) contacts wood; prevent with tip awareness, two-handed grip, side stance, full throttle.
ChippersFeed butt first from the side; never reach into the infeed; no loose clothing; shut down before clearing jams.
Stump grindersClear the area, locate utilities, keep people out of the debris zone.
Lifts and cranesLifts: fall protection, rated capacity, firm outriggers. Cranes: qualified operator and signal person, planned loads, load charts.
Covered in the full lesson
- Chainsaw
- Chipper
- Stump grinder
- Aerial lift
- Crane
Quick check
An exam-style question on this lesson. Open it to see the answer and why.
Kickback is most likely when:
- The upper tip of the guide bar touches wood
- The lower edge of the bar cuts
- The saw is at full throttle in the cut
- The chain brake is engaged
Answer: A. The upper quadrant of the nose is the kickback zone.
The full lesson adds more
In ArboristPass this lesson has a narrated video, five exam-style questions, a sorting drill, flashcards and a printable study sheet, and the course ends with 3 full mock exams.
Previous: Climbing systems and aerial rescue · Next: Rigging, felling, dismantling and emergencies