Lesson notesDomain 9: Safe Work Practices · 15% of the exam
Climbing systems and aerial rescue
Climbing rope systems, knots and hitches, tying in and ascending, working and descending safely, and preparing for an aerial rescue.
Key points
Rope systemsMRS (moving rope, formerly DdRT) and SRS (stationary rope, formerly SRT); both need a solid tie-in point.
KnotsFriction hitches (Blake's, Distel, Prusik), bowline, figure eight, timber hitch; dress and set knots; stopper at the line's end.
Ascent and workSound, high, central tie-in; stay tied in; second attachment when cutting.
DescentSlow and controlled; never free-running.
Aerial rescueAssess hazards, call emergency services, trained rescuer performs the rescue, first aid and CPR, brief responders. Above 12 ft (3.65 m), a second person trained in emergency procedures must be within sight or voice contact.
Covered in the full lesson
- Tie-in
- Ascent
- Work
- Descent
- Rescue
Quick check
An exam-style question on this lesson. Open it to see the answer and why.
In a stationary rope system (SRS), the climber:
- Moves along a fixed rope using devices
- Pulls the rope over the tie-in point
- Does not need a tie-in point
- Climbs without a harness
Answer: A. SRS was formerly called single rope technique.
The full lesson adds more
In ArboristPass this lesson has a narrated video, five exam-style questions, a sorting drill, flashcards and a printable study sheet, and the course ends with 3 full mock exams.
Previous: PPE and climbing equipment · Next: Tools, chainsaws, chippers, aerial lifts and cranes