Lesson notesDomain 9: Safe Work Practices · 15% of the exam

PPE and climbing equipment

Personal protective equipment from head to foot, climbing saddles, connectors, lanyards and friction devices, and how to inspect and maintain it all.

Key points

PPEHelmet (chin strap aloft), eye/face, hearing, chainsaw leg protection on the ground (ASTM F1897), boots, task-matched gloves.
CarabinersSelf-closing, self-double-locking (two deliberate actions), at least 5,000 lb (22.2 kN).
Climbing lineSynthetic, at least 0.44 in (11 mm), minimum breaking strength 5,000 lb (22.24 kN) when new (Z133-2026; 5,400 lb in Z133-2017).
SystemSaddle, lanyard, friction devices; second point of attachment when using a saw aloft; spurs for removals and emergencies only.
CareInspect before every use, wear and adjust correctly, clean and store properly, keep records, retire when in doubt.

Covered in the full lesson

  • Leg protection
  • Carabiners
  • Climbing line
  • Cutting aloft
  • All gear

Quick check

An exam-style question on this lesson. Open it to see the answer and why.

When must chainsaw leg protection be worn?
  1. Whenever operating a chainsaw on the ground
  2. Only when climbing
  3. Only in winter
  4. Never with electric saws
Answer: A. Cut-resistant chaps or pants protect against contact with the running chain.

The full lesson adds more

In ArboristPass this lesson has a narrated video, five exam-style questions, a sorting drill, flashcards and a printable study sheet, and the course ends with 3 full mock exams.

See the course

Previous: Electrical hazards and minimum approach distances · Next: Climbing systems and aerial rescue

All 48 lessons · Free video lessons · About the exam