Lesson notesDomain 9: Safe Work Practices · 15% of the exam
Rigging, felling, dismantling and emergencies
Rigging hardware and techniques, anchor strength, felling and dismantling cuts, removal hazards such as barber chairs, work positioning, and emergency response.
Key points
RiggingLowering devices, rated blocks and pulleys, tip and butt ties, tag lines; dynamic loads can be many times a piece's weight.
Felling cutsDirectional notch, hinge (never cut through), back cut; aloft: spear, drop and snap cuts.
Removal hazardsBarber chair (trunk splits upward on leaners), loss of directional control, lean, wind, decay, power lines.
Control and zonesTag lines, mechanical advantage, wedges; workers not involved ≥2× tree height away, involved workers (ropes, winches) ≥1.5×; escape routes about 45° either side of the line opposite the fall.
EmergenciesEmergency action plan, first aid and CPR, secure the scene, call and brief responders, document afterward.
Covered in the full lesson
- Rigging
- Felling cuts
- Felling zone
- Escape routes
- Emergencies
Quick check
An exam-style question on this lesson. Open it to see the answer and why.
The uncut strip of wood that guides a falling tree is the:
- Hinge
- Back cut
- Kerf
- Notch face
Answer: A. Cutting through the hinge loses directional control.
The full lesson adds more
In ArboristPass this lesson has a narrated video, five exam-style questions, a sorting drill, flashcards and a printable study sheet, and the course ends with 3 full mock exams.
Previous: Tools, chainsaws, chippers, aerial lifts and cranes