Lesson notesDomain 7: Trees and Construction · 9% of the exam

Tree protection zones and critical root zones

The standards for trees and construction, how to size a tree protection zone, the critical root zone, and the methods that protect roots, trunks and crowns.

Key points

StandardsANSI A300 Part 5 with the ISA BMP Managing Trees During Construction (US); BS 5837 (UK); local ordinances.
TPZFenced area protecting roots, trunk and crown; often 6–18 times trunk diameter (rule of thumb 1–1.5 ft radius per inch).
CRZRoots needed for health and stability; smaller than the TPZ; definitions vary.
ToleranceVaries by species; young, vigorous trees tolerate more; mature or declining trees need more protection.
ProtectionFences and signs, 6–12 in (15–30 cm) wood chip mulch or mats for access, trunk padding, advance pruning, tunneling, air excavation.

Covered in the full lesson

  • TPZ fence and signs
  • Wood chip mulch or mats
  • Trunk padding
  • Advance clearance pruning
  • Boring, air excavation
  • Clean root cuts at the TPZ edge

Quick check

An exam-style question on this lesson. Open it to see the answer and why.

Which US standard covers tree management during construction?
  1. ANSI A300 Part 5
  2. ANSI A300 Part 1
  3. ANSI Z60.1
  4. ANSI Z133
Answer: A. Part 5 covers site planning, development and construction.

The full lesson adds more

In ArboristPass this lesson has a narrated video, five exam-style questions, a sorting drill, flashcards and a printable study sheet, and the course ends with 3 full mock exams.

See the course

Previous: Construction impacts on roots, trunks and crowns · Next: Tree protection plans through the construction phases

All 48 lessons · Free video lessons · About the exam